What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
13.06.2025 02:16

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–10[John johnson John Johnson ]
2024–10–16 [ OO OLAOYE OYEBODE ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
the problem then depends on "how fast does the fuse operate?".
There are three different concepts here that are getting confused.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
These devices are installed between the “hot” and “neutral” and protective ground.
(Dc diagram shown, AC is similar).
One is “what exactly is in a ‘surge protector’ ? ”
Trump administration prepares to ease big bank rules - Politico
He then describes Rainy Season and Lightning.
Because the load is inductive, the current lags the voltage.(by a bit).
This is 'the assistant's answer'
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
so, what happens?
what exactly is a ‘surge’ protector?
IO Interactive Reveals 007 First Light, Full Trailer Out This Week - Game Informer
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
I post the exact comment here.
but I think this circuit , shows a few more pieces.
[image of Common-mode choke]
Edit 2024–10.
In schematic diagrams this is the symbol for a fuse:
What are some of your favorite hip hop lyrics?
This device then solves the entire problem.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
What is lightning?
How do you handle your mother-in-law after you heard her talking badly about you in the next room?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This one hit behind the barn.
[old diagram got deleted by accident]
This is where this question deviates from being a 'generic' question, and becomes more specific.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
But it can get overloaded, and no longer works.
Stop Work Orders At NASA JPL - NASA Watch
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then describes the function of a fuse.
There are two important concepts here.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
It seems Mohan does not understand the difference between a comment and an Answer.
It also is a device that limits the change in current flow.
Barnstars:
But… the neutral is now “floating” because of the 1 ohm resistance.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
The other is “what does a “fuse” do?”
nine
Now when you have a certain ac resistance, then a current flows in a loop.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is where the MOV conducts again, and dissipated the energy.
A circuit breaker is similar, but is resettable.
The third is lightning and “how it gets conducted into a home.”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
He then asserts :
A fuse is a non-resetable over current circuit protector.
Upvotes:
First Sentence:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
eight
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
One
At one ohm, the resistor has a maximum of 1 watt power.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
For this case there are devices called Metal oxide varistors (MOV).
At least they know the answer if they wanted it.
a photo is worth a thousand words.
2024–10–14 [Omar Gharbi Omar Gharbi ]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Here is a simplified AC power diagram.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
The MOV will conduct when the voltage exceeds 50% of line voltage.
but this device (an Inductor) … impedes the rapid changes in the current.
What does a fuse do?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
An AC voltage/ current source, and an ac inductive load.
The bolt then partially travels down the line to your home.